NC Feeders
NC Grip Feeders NCG65SA
The feeder designed takes the advantages of an air feeder and pursues easy to use with NC control.
Use a timing belt driving system and does not require lubrication.
NCG65SA Operation panel
Features
Touch panel
The touch panel size has been increased to 5.7 inches, improving visibility and operability.
Improved feeding speed
The stroke rate at a feed length of 10 mm has been improved to 360 SPM.
Language switching function
Users can easily change the display language between Japanese, English, and Chinese.
Remote Switches
Clampers ON/OFF and material feeding can be operated remotely away from the main body (optional).
Multi-feed function
Equipped with a multi-feed function as standard that allows for flexible combinations of different feed lengths and feed times.
Specifications
| Item/Model | NCG65SA | NCG65HA | NCG200A | NCG100A | |
|---|---|---|---|---|---|
| Maximum width of material (mm) | 65 | 65 | 200 | 100 | |
| Material thickness (mm) | 0.1 to 1.0 | 0.1 to 1.0 | 0.1 to 1.0 | 0.1 to 1.0 | |
| Feed length (mm) | 1.00 to 80.00 | 1.00 to 80.00 | 1.00 to 200.00 | 1.00 to 100.00 | |
| Repeatability accuracy (mm) | Feed lengths less than 30 mm | ±0.05 | ±0.05 | ±0.05 | ±0.05 |
| Feed lengths over 30 mm | ±0.1 | ±0.1 | |||
| Maximum SPM (SPM) | 360 | 500 | 180 | 180 | |
| Clamp force (N) | 294*1 | 294*1 | 972*1 | 729*1 | |
| Operating air pressure (MPa) | 0.4 to 0.5 | ||||
| Body mass (kg) | 24 | 44(18)*2 | 104(18)*2 | 80(18)*2 | |
| Operating temperature (°C) | 8 to 40 | 8 to 40 | 8 to 40 | 8 to 40 | |
| Humidity (%RH) | 35 to 80 (No condensation) | ||||
| Storage temperature (°C) | -10 to 60 | ||||
| Air consumption (L /min) | 40 | 55 | 70 | 60 | |
| Power consumption (VA) | 450 | 680 | 1000 | 1000 | |
| Power source | Single phase AC 200V | Triple phase AC 200V | Triple phase AC 200V | Triple phase AC 200V | |
| Optional functions | NCG65SA | NCG65HA | NCG200A | NCG100A |
|---|---|---|---|---|
| 1.External operation function | optional | optional | optional | optional |
| 2.Material break (end) detector | optional | optional | optional | optional |
| 3.Multi-feed function | standard | optional*3 | optional*3 | optional*3 |
*1: Those value is based on the supply air pressure of 0.4 MPa.
*2: The mass includes the main unit and controller. The value in ( ) is the mass of the controller alone.
*3: Achieved by communication function. Please contact us for details about this function.
*4: These values are for a test material of SPCC 65 w × 0.5 t, at a feed speed of 99. Applicable for materials with a cross-section (width × thickness) of 32 mm2 or less.
*5: These values are for test material SPCC65w x 1.0t, feed speed 89. Applies to material cross-sectional area of 65mm2 or less.
*6: These values are for test material SPCC65w x 1.0t, feed speed 99. Applies to material cross-sectional area of 65mm2 or less.
*7: About NCG200A, the values are for test material SPCC200w x 1.0t, feed speed 99. Applies to material cross-sectional area of 200mm2 or less. About NCG100A, the values are for test material SPCC100w x 1.0t, feed speed 99. Applies to material cross-sectional area of 100mm2 or less. The maximum feed length of NCG100A is 100mm.
● Values for accuracy and SPM are from our in-house tests. Materials, dies, peripheral devices, and feed conditions may result in values that are not within these specified ranges. The SPM is a guideline value when the feed signal angle is distributed 180 degrees.
● Contact us about soft materials (paper, film, wire, etc.).
Dimensions
