NC Feeders
NC Belt Feeders NCG200ABW/BS / NCG100ABW/BS

The NC belt feeder is designed for soft materials feeding based on the NC grip feeder.

It uses the same controller as NCG65HA and is equipped with multiple functions such as "External Control", "Model Number Management" etc., making it easier to use.

There are two types: the single belt type, which feeds materials by placing them on the belt, and the double belt type, which feeds materials by sandwiching them between the upper and lower belts.

Suitable for feeding the materials such as film, paper, foil, and ceramics etc.

Features

Supports wide and thin materials
Possible to handle material widths up to max. 200mm, max. 100mm, respectively.

External control
Equipped with necessary communication functions for external control and a loader for model number management.

External operation function
Possible to switch interlock operations ON/OFF with remote cable (signal lines).

Model (Die) number management
Save feeding conditions for each die (number) to the PLC (Programmable logic controller) or PC, and this feeding conditions can be set simply by transferring data when changing dies.

Multi-feed
One cycle can have up to 15 steps, and each step can be combined with different data in which the feed length, speed, and repeating times are set as one step, so that multi-feed can be carried out for flexible feeding by repeating the cycle operation.

Central control
The feeder can be controlled from a main machine such as a press machine by using communication functions and remote control method (feeder control via signal lines).

Specifications