Winding Machines
Products
AUTOMATIC WINDER
A wide variety of automatic winders designed for general-purpose use, including both of horizontal and vertical automatic winders.
The product strip amount (loop) of the high-speed press line is detected by an analog loop controller, and in combination with inverter control follows the line speed at continuously variable speed.
The product be wound up together with interleaf paper at a constant speed without applying unnecessary tensile force to the product strip.
・HORIZONTAL AUTOMATIC WINDER MHA Series MHA-104(S)II / MHA-204(S)II / MHA-106(S)II / MHA-206(S)II
HORIZONTAL AUTOMATIC WINDER
Designed to be very compact and space-saving even with multiple reels, performs automatic core-winding and reel changing, suitable for long periods of unattended operation.
・HORIZONTAL AUTOMATIC WINDER MHA Series MHA-104(S)VI
・HORIZONTAL AUTOMATIC WINDER MHA Series MHA-102(S)II / MHA-202(S)II
・HORIZONTAL AUTOMATIC WINDER MHA Series MHA-104(S)IV / MHA-204(S)IV
・VERTICAL AUTOMATIC WINDER MVA Series MVA-12(S)
・VERTICAL AUTOMATIC WINDER MVA Series MVA-102(S)
VERTICAL AUTOMATIC WINDER
Most used to reel-winds automotive connector terminals with high stiffness, lead frames, LED frames, and center carrier products, etc.
・VERTICAL AUTOMATIC WINDER MVA Series MVA-104(S) / MVA-106(S)
・MULTI-LAYER SPIRAL REEL WINDER and UNWINDER STR-900 / STU-900 / STR/U-900
THE MULTI-LAYER SPIRAL REEL WINDER and UNWINDER
Excellent effect on high-speed press processing for the long production run, secondary processing, and plating processing lines.
SIMPLE WINDER
Designed focus on general-purpose, low cost and space-saving.
Used to reel-winds a wide variety and small lot products such as connector terminals and lead frames.
・HORIZONTAL SIMPLE WINDER ME Series MEH-11 / MEH-22
HORIZONTAL SIMPLE WINDER
Perfect for winding precision connectors onto reels.
・HORIZONTAL SIMPLE WINDER TM-1100B
・VERTICAL SIMPLE WINDER MEV Series MES-12 / MEV-11 / MEV-12 / MEV-22 / MEV-226 / MEV-24
VERTICAL SIMPLE WINDER
Suitable for reel-winding product strip of high stiffness.
・FLEXIBLE SIMPLE WINDER MEF Series MEF-11
FLEXIBLE SIMPLE WINDER
A multipurpose, space-saving, general-purpose machine designed to allow the reel deck to be positioned horizontally, inclined or vertically.
Equipment Selection Table
Evaluation Symbols: +++ Optimal, ++ Suitable, + Consultation Needed (Possible with Modifications)
| Model | Automatic Winding Equipment | Simple Winding Equipment (ME Series) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Horizontal (MHA Series) | Vertical (MVA Series) | Spiral Reel | Horizontal | Vertical | Adjustable Angle | Rewinding Equipment | ||||||||
| MHA-104(S)II MHA-204(S)II MHA-106(S)II MHA-206(S)II |
MHA-104(S)III MHA-204(S)III MHA-106(S)III MHA-206(S)III |
MHA-104(S)VI | MHA-102(S)II MHA-202(S)II |
MHA-104(S)IV MHA-204(S)IV |
MVA-12(S) | MVA-102(S) | MVA-104(S) MVA-106(S) |
STR-900 STU-900 STR/U-900 |
MEH-11 MEH-22 |
TM-1100B | MES-12 / MEV-11 / MEV-12 / MEV-22 / MEV-226 / MEV-24 |
MEF-11 | MEH-22RU | |
| Type of Wind | Horizontal | Vertical | Horizontal | Horizontal | Vertical | Horizontal/Vertical | Horizontal | |||||||
| Automatic core-winding | +++ | +++ | +++ | +++ | +++ | +++ | +++ | +++ | ||||||
| Automatic reel change | +++ | +++ | +++ | +++ | +++ | +++ | +++ | +++ | ||||||
| Sampling function | +++ | +++ | +++ | +++ | +++ | +++ | +++ | +++ | ||||||
| Applicability to Narrow-Pitch Terminals | ++ | ++ | ++ | +++ | +++ | + | + | + | ++ | +++ | + | +++ | +++ | |
| Applicability to Soft Products | ++ | ++ | ++ | +++ | +++ | + | + | + | ++ | +++ | + | +++ | +++ | |
| Applicability to Hard Products | ++ | ++ | ++ | ++ | ++ | +++ | +++ | +++ | ++ | + | +++ | +++ | +++ | ++ |
| Applicability to General Products | +++ | +++ | +++ | +++ | +++ | ++ | ++ | ++ | +++ | +++ | ++ | +++ | +++ | |
| Applicability to Wide Products (40mm or Wider) | ++ | ++ | ++ | ++ | ++ | ++ | +++ | +++ | ++ | +++ | +++ | +++ | ++ | |
| Applicability to Center Carrier Products | ++ | ++ | ++ | ++ | ++ | +++ | +++ | +++ | ++ | ++ | +++ | +++ | ++ | |
| Applicability to Heavy Products | +++ | +++ | ++ | |||||||||||
| Compatibility with High-Speed Lines | +++ | +++ | +++ | ++ | + | ++ | ++ | +++ | +++ | + | + | + | ||
| Decrease change-over time | +++ | +++ | +++ | +++ | +++ | ++ | ++ | ++ | ++ | |||||
| Operability | +++ | +++ | +++ | +++ | +++ | +++ | +++ | +++ | + | + | + | |||
| Long periods of unattended operation | +++ | +++ | +++ | ++ | +++ | ++ | ++ | +++ | +++ | |||||
| Space-saving | +++ | +++ | +++ | +++ | +++ | +++ | +++ | + | +++ | |||||
| Affordable Equipment | ++ | ++ | ++ | +++ | +++ | +++ | +++ | + | + | +++ | ++ | +++ | +++ | |