NC Feeders
NC Grip Feeders NCG200A / NCG100A
The new NC grip feeder uses a timing belt driving system and does not require lubrication. The specifications have been expanded to a maximum material width of 200 mm, feed length of 1 to 200 mm, while also realized space saving.
It uses the same controller as NCG65HA and is equipped with multiple functions such as "External Control", "Model Number Management" etc., making it easier to use.
Features
Supports a wide range of materials
A variety of easily damaged, thin, irregularly shaped, films, resins, and other materials can be fed.
Supports wide and thin materials
The NCG200A can handle material widths up to maximum 200mm.
Made to order specifications allow for material widths up to 500mm, or change to belt feeders suitable for feeding thin materials.
External control
Equipped with necessary communication functions for external control and a loader for model number management.
External operation function
Possible to switch interlock operations ON/OFF with remote cable (signal lines).
Model (Die) number management
Save feeding conditions for each die (number) to the PLC (Programmable logic controller) or PC, and this feeding conditions can be set simply by transferring data when changing dies.
Multi-feed
One cycle can have up to 15 steps, and each step can be combined with different data in which the feed length, speed, and repeating times are set as one step, so that multi-feed can be carried out for flexible feeding by repeating the cycle operation.
Central control
The feeder can be controlled from a main machine such as a press machine by using communication functions and remote control method (feeder control via signal lines).
Specifications
| Item/Model | NCG65SA | NCG65HA | NCG200A | NCG100A | |
|---|---|---|---|---|---|
| Maximum width of material (mm) | 65 | 65 | 200 | 100 | |
| Material thickness (mm) | 0.1 to 1.0 | 0.1 to 1.0 | 0.1 to 1.0 | 0.1 to 1.0 | |
| Feed length (mm) | 1.00 to 80.00 | 1.00 to 80.00 | 1.00 to 200.00 | 1.00 to 100.00 | |
| Repeatability accuracy (mm) | Feed lengths less than 30 mm | ±0.05 | ±0.05 | ±0.05 | ±0.05 |
| Feed lengths over 30 mm | ±0.1 | ±0.1 | |||
| Maximum SPM (SPM) | 360 | 500 | 180 | 180 | |
| Clamp force (N) | 294*1 | 294*1 | 972*1 | 729*1 | |
| Operating air pressure (MPa) | 0.4 to 0.5 | ||||
| Body mass (kg) | 24 | 44(18)*2 | 104(18)*2 | 80(18)*2 | |
| Operating temperature (°C) | 8 to 40 | 8 to 40 | 8 to 40 | 8 to 40 | |
| Humidity (%RH) | 35 to 80 (No condensation) | ||||
| Storage temperature (°C) | -10 to 60 | ||||
| Air consumption (L /min) | 40 | 55 | 70 | 60 | |
| Power consumption (VA) | 450 | 680 | 1000 | 1000 | |
| Power source | Single phase AC 200V | Triple phase AC 200V | Triple phase AC 200V | Triple phase AC 200V | |
| Optional functions | NCG65SA | NCG65HA | NCG200A | NCG100A |
|---|---|---|---|---|
| 1.External operation function | optional | optional | optional | optional |
| 2.Material break (end) detector | optional | optional | optional | optional |
| 3.Multi-feed function | standard | optional*3 | optional*3 | optional*3 |
*1: Those value is based on the supply air pressure of 0.4 MPa.
*2: The mass includes the main unit and controller. The value in ( ) is the mass of the controller alone.
*3: Achieved by communication function. Please contact us for details about this function.
*4: These values are for a test material of SPCC 65 w × 0.5 t, at a feed speed of 99. Applicable for materials with a cross-section (width × thickness) of 32 mm2 or less.
*5: These values are for test material SPCC65w x 1.0t, feed speed 89. Applies to material cross-sectional area of 65mm2 or less.
*6: These values are for test material SPCC65w x 1.0t, feed speed 99. Applies to material cross-sectional area of 65mm2 or less.
*7: About NCG200A, the values are for test material SPCC200w x 1.0t, feed speed 99. Applies to material cross-sectional area of 200mm2 or less. About NCG100A, the values are for test material SPCC100w x 1.0t, feed speed 99. Applies to material cross-sectional area of 100mm2 or less. The maximum feed length of NCG100A is 100mm.
● Values for accuracy and SPM are from our in-house tests. Materials, dies, peripheral devices, and feed conditions may result in values that are not within these specified ranges. The SPM is a guideline value when the feed signal angle is distributed 180 degrees.
● Contact us about soft materials (paper, film, wire, etc.).
Dimensions
NCG200A
NCG100A
